Our second-hand machines – as good as new!
Our used machines are modernized by our qualified employees and their decades of experience in mechanical engineering. Components are usually completely dismantled, cleaned, and repainted as required.
The interior gets a “makeover” treatment. Wear parts, guide elements, fluid lines, sensors and cables in the machine area are replaced, working and milling spindles are overhauled in proven manufacturer quality, and the control system is upgraded to the state of the art.
Here you'll learn more about our machine refit:
https://www.index-traub.com/en/ixservices/refit/
Repurchase of used machines
We are also interested in repurchasing your used INDEX or TRAUB machine.
This applies in particular to machines built after 1995.
Just give us a call!
Refit-Team
+49 (0)711 3191-9612
Production turning machine- INDEX ABC

Machine number: 402039
Year of manufacture: 2005
Basic equipment
Main spindle: max. d=52mm, C-Axis
Synchronized spindle: for collet clamping
Tool carrier 1: X/Z axis
Tool carrier 2 : X/Z axis
Rear-end drilling unit X/Z axis for 5 stations
Control: INDEX C200-4D
Turn-mill center - INDEX G200 compact SL

Machine number: 511296
Year of manufacture: 2001
Basic equipment
Main spindle: max. d=42mm, C axis
Counter spindle: max. d=42mm, C axis
Tool carrier 1: X/Z axis
Tool carrier 2 : X/Z axis
Control: INDEX C200-4D SolutionLine
Turn-mill center - INDEX G200 compact

Machine number: 511613
Year of manufacture: 2003
Basic equipment
Main spindle: max. d=42mm, C axis
Counter spindle: max. d=42mm, C axis
Tool carrier 1: X/Y/Z axis
Tool carrier 2 : X/Z axis
Control: INDEX C200-4D
Turn-mill center - INDEX G300

Machine number: 500302
Year of manufacture: 1999
Basic equipment
Main spindle: max. d=102mm, C axis, with single pressure clamping unit, manual
Counter spindle: max. d=90mm, C axis, with single pressure clamping unit, manual
Tool carrier 1: X/Y/Z/B axis
Tool carrier 2 : X/Z axis
Control: INDEX C200-4D
Vertical truning center - INDEX V100

Machine number: 000088
Year of manufacture: 2004
Basic equipment
Main spindle: max. d=30 mm, C axis, speed max. 10000 rpm
clamping cylinder, and aligning and indexing unit
Machine can be equipped with external and internal grinding devices
Attachment of any linear tool carriers possible
Control: INDEX C200-4D
Multi-spindle automatics - INDEX MS25

Machine number: MS2512121
Year of manufacture: 1987
Basic equipment
Main drive:
Power (at 50 Hz) 15 kW
Speed (at 50 Hz) 1450 rpm
Sliding headstock lathes - TRAUB TNL12

Machine number: 6000194
Year of manufacture: 1999
Basic equipment
Main spindle: max. d=12.7mm, C axis
Counter spindle: max. d=12.7mm, C axis
Tool carrier 1: X/Y axis with tool drive
Tool carrier 2: X/Z axis with tool drive
Back working attachment: X axis with tool drive
Front working attachment: X-Z axis with tool drive
Control: TRAUB TX8i